Toshiba Magnia Z500 - Manual (Page 70)

Utilities
Utility Menu
67
Configuration Save Disk
This diskette is use save to setup information for MAGNIA Z500.
DOS Disk
This diskette is used to starts the utility programs used on the
server.
HW Diagnostics Program
This diskette is used to boot from the floppy disk drive and run this
program.
The HW Diagnostics Program checks the operation of the
hardware and the input/output device and displays the
configuration information of the system.
LSI IDE RAID Windows 2000 Driver
This diskette is used on Windows 2000 for the MAGNIA Z500
on-board IDE RAID controller.
Adaptec SCSI Windows 2000 Driver
This diskette is used on Windows 2000 for the ASC-29160 SCSI
controller or the SCSI riser card.
Intel LAN Windows 2000 Driver
This diskette is used on Windows 2000 for the MAGNIA Z500
onboard LAN controllers.
Create Floppy disks
1 Select the title of the diskette you want to create, then click
[Create] to continue.
2 Insert a blank diskette according to the instruction.
HW Setup
RAID Configuration
The RAID Manager starts by selecting [RAID Configuration].
Creating, repairing and deleting RAID configuration, and creating
the hot-spare are available in the RAID Manager.
For more information, refer to the MegaRAID User's Manual (for
MR520).