Toshiba Magnia Z500 - Manual (Page 94)

HW Diagnostics
Items of HW Diagnostics 92
Log Utilities
This function logs error information generated while a test is in
progress; it shows the results stored in RAM.
The error logs can be checked by selecting [03. LOG UTILITIES]
in the main menu.
Selecting [03.LOG UTILITIES] shows the following message:
LOG UTILITIES Screen
XXXXX ERRORS
The message shows the number of errors.
PASS COUNT
If the test parameter "Test Loop" is set as "Yes" in the test, the pass
count is displayed.
CNT
It shows the number assigned, according to the order of
occurrence of the errors.
TEST
XXX XX XX