Toshiba Magnia Z500 - Manual (Page 79)

HW Diagnostics
Items of HW Diagnostics
77
Adding Test Items
To add a test item to the Running test, press key, then select
a test item with arrow keys, and press to select subtests.
To return to the previous menu, press key.
NOTE: Do not add the subtest [01. Pressed Key Display] of
[02. KEYBOARD TEST] to the Running test. This subtest
requires a key input so that the Running test in progress is
stopped if this subtest is added to the Running test.
Do not select only the subtest [08. CACHE MEMORY TEST]
as the Running test.
Deleting Test Items
Move the cursor on a test item, then press to delete the test
item.
Saving Test Items
When you exit the test items selection menu, the message "Do you
save data?" appears. Select "YES" to save setting, or "NO" not to
save the setting.
NOTE: The edited test items are saved on the system
memory. When you restart the HW Diagnostics Program, the
test items will return to the initial setting.
Execution of Test
During DIAGNOSTIC TEST and RUNNING TEST, the
following screen appears: