Toshiba Satellite P200 (PSPBL) - Manual (Page 77)

User’s Manual 4-19
Operating Basics
Using optical disc drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical disc drives. The full-size drive provides
high-performance execution of disc-based programs. You can run either
12cm (4.72") or 8cm (3.15") discs without an adapter. An ATAPI interface
controller is used for disc drive operation. When the computer is accessing
a disc, an indicator on the drive illuminates.
If you have a DVD Super Multi drive or HD DVD drive, refer also to the
Writing CD/DVDs on DVD Super Multi drive section or HD DVD drive
section for precautions on writing to CDs.
Loading optical disc media
To load a disc, follow the steps below.
1. Turn on the power.
2. a. Press the eject button to open the drawer slightly.
Pressing the eject button
b. Pressing the eject button will not open the drawer when the
computer's power is off. If the power is off, you can open the drawer
by inserting a slender object (about 15mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Manual release with the eject hole
Use the DVD Video Player application to view DVD-Video discs.
Eject button