beautypg.com

Hibernation mode – Toshiba Satellite P200 (PSPBL) User Manual

Page 56

background image

User’s Manual

3-6

Getting Started

Hibernation mode

The Hibernation Mode feature saves the contents of memory to the hard

disk drive when the computer is turned off so that, the next time it is turned

on, the previous state is restored. Please note that the Hibernation Mode

feature does not save the status of any peripheral devices connected to the

computer.

Benefits of Hibernation Mode

The Hibernation Mode feature provides the following benefits:

Saves data to the hard disk drive when the computer automatically

shuts down because of a low battery condition.

You can return to your previous working environment immediately when

you turn on the computer.

Saves power by shutting down the system when the computer receives

no input or hardware access for the time period set by the System

Hibernate feature.

Allows the use of the panel power off feature.

Starting Hibernation Mode

To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Click the arrow button (

) in the power management buttons

(

).

3. Select Hibernate from the menu.

Automatic Hibernation Mode

The computer can be configured to enter Hibernate Mode automatically

when you press the power button or close the lid. In order to define these

settings, you can follow the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Maintenance and click Power Options.
3. Click Choose what the Power Button do or Choose what closing

the lid does.

Save your data. While entering Hibernation Mode, the computer saves

the contents of memory to the hard disk drive. However, for safety

sake, it is best to save your data manually.

Data will be lost if you remove the battery or disconnect the AC adaptor

before the save is completed. Wait for the Hard Disk Drive indicator to

go out.

Do not install or remove a memory module while the computer is in

Hibernation Mode. Data will be lost.

You can also enable Hibernation Mode by pressing Fn + F4. Please refer

to Chapter 6,

The Keyboard

, for further details.

This manual is related to the following products: