Turning on the power, Starting up for the first time, Turning off the power – Toshiba Satellite P200 (PSPBL) User Manual
Page 53: To the, Turning, Off the power
User’s Manual
3-3
Getting Started
Turning on the power
This section describes how to turn on the power.
1. If a USB floppy disk drive is connected, make sure the drive is empty - if a
disk is in the drive, press the eject button to remove it.
2. Open the display panel.
3. Press the computer's power button and then release it.
Turning on the power
Starting up for the first time
When you first turn on the power, the computer's initial screen is the
Windows Vista Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.
Be sure to read the Windows Operating System End User License
Agreement carefully.
Turning off the power
The power can be turned off in one of three modes, either Shutdown (Boot)
Mode, Hibernation Mode or Sleep Mode.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section
in this chapter.