Toshiba Satellite 2650 - Manual (Page 94)

User's Manual Setup and Password Security 8-3
Version
8
Last Saved on 19/09/99 14:08
Satellite 2610/2650 User's Manual – 08CHAP.DOC – ENGLISH – Printed on 19/09/99 as 08_261UK
Pointing Devices
This tab lets you select Auto-Selected and Simultaneous .
Auto-Selected If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint II is disabled.
Otherwise, the AccuPoint II is enabled. (Default)
Simultaneous Enables both the AccuPoint II and PS/2 mouse.
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Simultaneous Selects both the internal LCD and external
monitor for simultaneous display.
You cannot select TV display in Hardware Setup or TSETUP. To display
on a TV screen use hot keys
Fn + F5 . Refer to Chapter 5, Keyboard.
The LCD Display Stretch feature cannot be set in the Display window of
Hardware Setup. To set this function, follow the steps below.
1. Click Start , point to Settings and click Control Panel .
2. Double-click the Display icon to open the Display Properties
window. Then continue with step 3.
3. Click the Settings tab and click the Advanced button.
4. Click the Flat Panel tab and click the Display Stretch check box.