Toshiba Satellite 2650 - Manual (Page 48)

User's Manual Getting Started 3-5
Version
8
Last Saved on 18/09/99 14:07
Satellite 2610/2650 User's Manual – 03CHAP.DOC – ENGLISH – Printed on 18/09/99 as 03_261UK
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you
want to operate from AC power. It is also the fastest way to get started,
because the battery pack will need to be charged before you can
operate from battery power.
The AC adaptor can be connected to any power source supplying from 100
to 240 volts and 50 or 60 hertz. For details on using the AC adaptor to
charge the battery pack, refer to Chapter 6, Power and Power-Up Modes.
Use of the wrong adaptor could damage your computer. Toshiba
assumes no liability for any damage in such case. The current rating for
the computer is 3.0 amperes.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
2. Connect the AC adaptor’s DC output plug to the DC IN input port on
the back of the computer.
Connecting the adaptor to the computer
3. Plug the power cord into a live wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.