Pointing device – Toshiba Satellite 2650 User Manual
Page 148

10-12 Troubleshooting
User's Manual
Satellite 2610/2650 User's Manual – 10CHAP.DOC – ENGLISH – Printed on 19/09/99 as 10_261UK
Pointing device
If you are using a PS/2 or serial mouse, also refer to Chapter 9, Optional
devices, and to your mouse documentation.
AccuPoint II
Problem
Procedure
On-screen pointer
does not respond to
AccuPoint II operation
If a PS/2 mouse is connected, check the
Hardware Setup or TSETUP program. The
Pointing Device
option should be set to
Simultaneous
to use both the AccuPoint and a
PS/2 mouse.
If problems persist, contact your dealer.
PS/2 mouse
Problem
Procedure
On-screen pointer
does not respond to
PS/2 mouse operation
Check that the PS/2 mouse cable’s 6-pin
connector is firmly connected to the
mouse/keyboard port.
You may have connected the mouse after
turning the computer on. Turn off the computer,
make sure the mouse is firmly connected and
turn the computer back on.
Is your software configured to recognise the
mouse? Check the software documentation.
If problems persist, contact your dealer.