Toshiba Satellite 2650 - Manual (Page 137)

User's Manual Troubleshooting 10-1
Version
8
Last Saved on 19/09/99 14:08
Satellite 2610/2650 User's Manual – 10CHAP.DOC – ENGLISH – Printed on 19/09/99 as 10_261UK
Chapter 10
Troubleshooting
Toshiba designed the computer for durability. However, should problems
occur, following the procedures in this chapter can help to determine the
cause.
All readers should become familiar with this chapter. Knowing what
might go wrong can help prevent problems from occurring.
Problem solving process
Resolving problems will be much easier if you observe the following
guidelines:
Stop immediately when you recognise a problem exists. Further
action may result in data loss or damage. You may destroy valuable
problem-related information that can help solve the problem.
Observe what is happening. Write down what the system is doing
and what actions you performed immediately before the problem
occurred. If you have a printer attached, print a copy of the screen
using
PrtSc .
Isolate the problem. Using the tools available to you, such as the
troubleshooting tips in this chapter and the diagnostic test program,
TDIAGS , try to discover the specific actions that caused the problem.
The questions and procedures offered in this chapter are meant as a
guide, they are not definitive problem solving techniques. Many
problems can be solved simply, but a few may require help from your
dealer. If you find you need to consult your dealer or others, be
prepared to describe the problem in as much detail as possible.
Preliminary checklist
Consider the simplest solution first. The items in this checklist are easy to
fix and yet can cause what appears to be a serious problem.
Make sure you turn on all peripheral devices before you turn on the
computer. This includes your printer and any other external device
you are using.
Before you attach an external device, turn the computer off. When
you turn the computer back on it recognises the new device.
Make sure all options are set properly in the setup program.
Check all cables. Are they correctly and firmly attached? Loose cables
can cause signal errors.