Pioneer AVIC-F10BT - Manual (Page 80)

You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
The functions related to RDS (Radio Data Sys-
tem) are available only in areas with FM sta-
tions broadcasting RDS signals. Even if the
navigation system is receiving an RDS station,
not all the functions related with RDS will be
available.
% Touch [FM] on the “AV Source” menu to
display the
“FM” screen.
= For details concerning operations, refer to
Screen switching overview on page 18.
Reading the screen
1 2 3 7 6 5 4 9 8
c
a
b
d
e
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Preset number indicator
Shows what preset item has been selected.
4 Signal level indicator
5 TEXT indicator
Shows when the radio text is received.
6 NEWS indicator
Shows the status of news programmes.
7 TRFC indicator
Shows the status of traffic announcements.
8 Frequency indicator
9 Current time
a Programme service name indicator
Shows the programme service name (station
name) of the current station.
b PTY indicator
Shows the programme type of the current sta-
tion (when available).
c LOCAL indicator
Shows when local seek tuning is on.
d STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
e Radio text display area
Displays the radio text currently received.
Using the touch panel keys
2
3
4
1
1 Display the “Function” menu
= For details, refer to Using the
“Function” menu on page 82.
2 Select a preset channel
[c] or [d] can be used to switch preset chan-
nels.
3 Perform manual tuning
To tune manually, touch [c] or [d] briefly. The
frequencies move up or down one step at a
time.
Perform seek tuning
To perform seek tuning, touch and hold [c] or
[d] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p You can cancel seek tuning by touching
either [c] or [d] briefly.
Using the radio (FM)
Engb
80
Chapter
14