Customising preferences the options in the, Navi settings” menu 68, Displaying the “navi settings – Pioneer AVIC-F10BT User Manual
Page 68: Screen, Checking the connections of leads 68, Checking sensor learning status and, Driving status, The options in the “navi settings ” menu, Customising preferences, Displaying the “navi settings” screen
The options in the
“Navi
Settings
” menu
Displaying the
“Navi Settings”
screen
1
Press the HOME button to display the
“Top Menu”.
2
Touch [Settings].
The
“Settings Menu” screen appears.
3
Touch [Navi Settings].
The
“Navi Settings” menu appears.
Checking the connections of leads
Check that leads are properly connected be-
tween the navigation system and the vehicle.
Please also check whether they are connected
in the correct positions.
1
Display the
“Navi Settings” screen.
2
Touch [Connection Status].
The
“GPS Status” screen appears.
2
3
4
5
1
6
1 Speed Pulse
The Speed Pulse value detected by the navi-
gation system is shown. [0] is shown while
the vehicle is stationary.
2 GPS Antenna
Indicates the connection status of the GPS
aerial, the reception sensitivity, and from
how many satellites the signal is received.
Colour
Signal com-
munication
Used in posi-
tioning
Orange
Yes
Yes
Yellow
Yes
No
p When the GPS aerial is connected to
this navigation system, [
OK] is dis-
played.
When the GPS aerial is not connected to
this navigation system, [
NOK] is dis-
played.
p If reception is poor, please change the
installation position of the GPS aerial.
3 Handbrake
When the handbrake is applied, [
On] is dis-
played. When the handbrake is released,
[
Off] is displayed.
4 Power Voltage
The power voltage (reference value) pro-
vided from the vehicle battery to the naviga-
tion system is shown. If the voltage goes
out of the range from 11 V to 15 V, check
that power cable connection is correct.
5 Illumination
When the headlights or small lamps of a ve-
hicle are on, [
On] is displayed. When the
small lamps of a vehicle are off, [
Off] is dis-
played. (If the orange/white lead is not con-
nected, [
Off] appears.)
6 Back Signal
When the gear lever is shifted to
“R”, the
signal switches to [
High] or [Low]. (One of
these is displayed depending on the vehi-
cle.)
Checking sensor learning
status and driving status
p The navigation system can automatically
use its sensor memory based on the outer
dimensions of the tyres.
1
Display the
“Navi Settings” screen.
Customising preferences
Engb
68
Chapter
13