Pioneer AVIC-F10BT - Manual (Page 78)

p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [ –] to adjust the values for
Red, Green and Blue to create a favourite
colour.
Watch the illumination of hardware keys while
adjusting the colour.
Each time you touch [
+] or [
–] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be stored with all of the va-
lues set to
“+00”.
4 Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination col-
our.
5 Touch [OK] to return to the previous
screen.
Checking the version information
1 Display the
“System Settings” screen.
2 Touch [Service Information].
The
“Service Information Screen” screen ap-
pears.
3 Check the version information.
Replicating the settings
You can import settings you have made on the
utility programme
“NavGate Feeds” which is
available separately to the navigation system.
1 Insert an SD memory card into the SD
card slot.
= For more details of the operation, refer to In-
serting and ejecting an SD memory card on
page 13.
2 Press the HOME button to display the
“Top Menu”.
3 Touch [Settings].
The
“Settings Menu” screen appears.
4 Touch [Setting Replicator].
A message confirming whether to update the
settings appears.
5 Touch [Yes].
Update starts.
After updating the settings is finished, a mes-
sage confirming whether to restart the naviga-
tion system appears.
6 Touch [OK].
The navigation system restarts.
Setting
“Safe Mode”
For safety reasons, you can limit the functions
that are available while your vehicle is in mo-
tion.
1 Press the HOME button to display the
“Top Menu”.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [Safe Mode].
Each time you touch the key changes that set-
ting.
! [On] (default):
Activates the
“Safe Mode” function.
! [Off]:
Deactivates the
“Safe Mode” function.
Customising preferences
Engb
78
Chapter
13