Pioneer AVIC-HD3-II - Manual (Page 97)

Storing the strongest
broadcast frequencies
“BSM” (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under preset tuning keys [
P1]
— [P6]
and once stored there you can tune in to those
frequencies with a touch of the key.
% Touch and hold [BSM].
“BSM” starts. The six strongest broadcast fre-
quencies will be stored under preset tuning
keys [
P1] — [P6] in order of their signal
strength.
p To cancel the storage process, touch [Can-
cel].
p Storing broadcast frequencies with “BSM”
may replace broadcast frequencies you
have saved using [
P1]
— [P6].
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Touch [Local].
2 Touch [On] to turn local seek tuning on.
p To turn local seek tuning off, touch [Off].
3 Touch [c] or [d] to set the sensitivity.
There are four levels of sensitivity for FM.
Level:
1
— 2 — 3 — 4
The level
“4” setting allows reception of only
the strongest stations, while lower settings let
you receive weaker stations.
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
p The tuner automatically memorises the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio text.
1 Touch to display radio text.
Radio text for the currently broadcasting sta-
tion is displayed.
p When no radio text is received, “No Text” is
displayed.
2 Touch or .
Touching the keys switches the text contents
from the current radio text to the most recent
three radio text.
p If there is no radio text data in memory the
display will not change.
p If you touch [Current Radio Text], the
screen returns to the current radio text.
Storing and recalling radio text
You can store data from up to six radio text
transmissions in the touch panel keys
1
— 6.
1 Display the radio text you want to
store in memory.
= For details, refer to Displaying radio text on
this page
2 Press and hold any of the keys 1
— 6 to
store the displayed radio text.
The selected radio text is stored in memory.
The next time you press the same keys
1
— 6
in the radio text display, the stored text is re-
called from memory.
Using the AV Source (Built-in DVD Drive and Radio)
Engb
97
Chapter
11
Using
the
A
V
Source
(Built-in
DVD
Drive
and
Radio)