Pioneer AVIC-HD3-II - Manual (Page 41)

: Volume
Displays [ Volume].
= For more details about “Volume”, refer to
Setting the Volume for Guidance and Phone on
page 77
: Phone Book
Displays [ Phone Book].
= For details, refer to Calling a number in the
phone book on page 71
= For details, refer to Editing the entry in
“Phone Book” on page 73
: Menu Close
Hides the Shortcut menu.
Setting the Vehicle Dynamics
Display
You can change the content of the left and
right meters on the
Vehicle Dynamics Display.
Until the sensor
’s initial learning is complete,
only the voltage and clock are available.
p The speed displayed is a guideline and may
not correspond to the actual speed.
1 Switch to Vehicle Dynamics Display.
= For more details about “Changing the map
display mode
”, refer to Switching the view
mode on page 34
2 Touch the left or right meter.
Touch panel keys are displayed.
3 Touch the items you want to display.
You can select the following items:
[
Voltage]:
Displays the power supply and voltage sup-
plied from the battery to this system.
[
Acceleration]:
Acceleration in a forward direction is dis-
played. The
+ sign indicates acceleration while
the - sign indicates deceleration.
[ Lateral Acceleration]:
Acceleration in a side direction such as when
turning, is displayed. The
+ sign indicates a
right turn, while the - sign indicates a left turn.
[ Angular Velocity]:
Displays the vehicle
’s turning angle over one
second (how far it has turned in a second).
[
Slope]:
Displays the vehicle
’s vertical movement. +
side represents the rising angle, and - side the
falling angle.
[
Direction]:
Displays the direction your vehicle is travelling
in.
[
Clock]:
Current time is displayed.
[
Adjust Style]:
Touch [ Adjust Style] to display a screen for
selecting the panel pattern. Touch one of the
patterns from among those displayed on
screen to change the panel to the selected pat-
tern.
p If you touch [Peak Hold Reset], the maxi-
mum and minimum (green line) values indi-
cated in [
Acceleration] and [Lateral
Acceleration] are reset.
p You cannot change the speedometer at the
centre.
p Selecting Demo Mode in the Settings
menu enables you to perform a demonstra-
tion with random values.
How to Read the Map Display
Engb
41
Chapter
04
How
to
Read
the
Map
Display