Pioneer AVIC-HD3-II - Manual (Page 44)

Viewing the Map Colour
Legend
You can browse the type of the roads and
areas displayed on the map.
1 Touch [Map] in the navigation menu,
then touch [Map Legend].
2 Touch the type which you want to see.
3 Touch or to switch to the next page
or previous page.
On this screen, you can operate the following
items.
[
Day]:
You can check the colour of the Day screen.
[
Night]:
You can check the colour of the Night screen.
p To return the previous screen, touch
[ Back].
Changing the View Mode
for the Navigation Map
You can change the map display mode.
p You cannot perform this operation in
“Scroll mode”.
1 Touch [Map] in the navigation menu,
then touch [View Mode].
2 Touch the type that you want to set.
= For details, refer to How to Use the Map on
page 33
Setting the Map Colour
Change between Day and
Night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
1 Touch [Map] in the navigation menu.
2 Touch [Day/Night Display] to change
the setting.
Each time you touch the key changes that set-
ting.
[
Automatic]*:
You can change the colours of a map between
daytime and nighttime according to whether
the vehicle lights are On or Off.
[
Day]:
The map is always displayed with daytime col-
ours.
p To use this function with [Automatic], the
Orange/white lead of the navigation system
must be connected correctly.
p You can also change the brightness of the
screen between daytime and nighttime with
[
Dimmer].
= For details, refer to Operating the picture
adjustment on page 135
Changing the Setting of
Navigation Interruption
Screen
Set whether to automatically switch to the na-
vigation screen from the AV screen when your
vehicle approaches a guidance point such as
an intersection while displaying a screen other
than navigation.
1 Touch [Map] in the navigation menu.
Modifying Map Configurations
Engb
44
Chapter
05