Pioneer AVIC-HD3-II - Manual (Page 125)

1 Touch [Equalizer] in Audio Settings
menu.
2 Touch [Customize].
The details setting screen appears.
3 Touch c or d to select the equaliser
band to adjust.
Each time you touch c or d selects equaliser
bands in the following order:
Low
— Mid — High
4 Touch c or d to select the desired cen-
tre frequency.
Low: 40
— 80 — 100 — 160 (Hz)
Mid: 200 — 500 — 1K — 2K (Hz)
High: 3.15K
— 8K — 10K — 12.5K (Hz)
5 Touch c or d to adjust the level of the
equaliser band.
Each time you touch c or d increases or de-
creases the level of the equalisation band.
+12dB to
–12dB is displayed as the level is in-
creased or decreased.
6 Touch c or d to select the desired [Q].
Touch c or d until the desired the curve char-
acteristics appears in the display.
Wide2
— Wide1 — Narrow1 — Narrow2
p To adjust other bands, repeat step 3 to step
6.
Setting the simulated sound stage
You can select the desired effect from various
simulated sound stages, such as Music Studio
or Dynamic Theatre. You can also adjust a lis-
tener positioning effect.
Setting a stage that fits your image
1 Touch [Staging] in Audio Settings
menu.
2 Touch desired stage setting.
p [Living Room] setting that emphasises
mid-range sound hardly has any effect near
the maximum volume level.
p When you set staging to an option other
than [ Off], the high pass filter (HPF) setting
turns [ Off].
= For details, refer to Using the high pass filter
on page 127
Adjusting a position effect
You can select a listener position that you
want to make as the centre of sound effects.
1 Touch [Staging] in Audio Settings
menu.
2 Touch [Position].
3 Touch desired position.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
Customising the Audio Setting related with Audio Visual
Engb
125
Chapter
14
Customising
the
Audio
Setting
related
with
Audio
Vi
sual