Pioneer AVIC-HD3-II - Manual (Page 124)

Equaliser curve
Super Bass
Super Bass is a curve in which only low-range is
boosted.
Powerful (Default)
Powerful is a curve in which low-range and high-
range sounds are boosted.
Natural
Natural is a curve in which low-range and high-range
sounds are slightly boosted.
Vocal
Vocal is a curve in which the mid-range sounds, such
as the human vocal range, are boosted.
Flat
Flat is a flat curve in which nothing is boosted.
Custom1
Custom1 is an adjusted equaliser curve that you cre-
ate. A separate custom curve can be created.
Cus-
tom1 and Custom2 are adjusted equaliser curves
that you create. Adjustments can be made with a 3-
band parametric equaliser.
Custom2
Custom2 is an adjusted equaliser curve that you cre-
ate. If you select this curve, the effect is reflected all
audio source.
1 Touch [Equalizer] in Audio Settings
menu.
2 Touch desired equaliser.
p When [Flat] is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
[
Flat] and a set equaliser curve.
Adjusting equaliser curves
You can adjust the currently selected equaliser
curve setting as desired.
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve
Super Bass, Powerful,
Natural, Vocal, Flat, or Custom1 is se-
lected, the equaliser curve settings will be
memorised in
Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when
Custom2 curve is selected, the
Custom2 curve will be updated.
p The adjusted Custom1 curve is memorised
for each of the source selected, but one
curve is shared for the following sources.
! AM and FM
! EXT 1 and EXT 2
! AUX and AV INPUT
In the built-in DVD drive, different curves
can be memorised for a DVD-Video and a
CD (CD-DA or MP3).
You can adjust the centre frequency, level
and the Q (curve characteristics) of each
band (
Low/Mid/High).
! Band:
You can select the band you want to ad-
just.
! Frequency:
You can select which frequency to be
set as the centre frequency.
! Level:
You can adjust the decibel (dB) level of
the selected band.
! Q:
You can select the details of the curve
characteristics. (The following figure
shows the characteristic image.)
Customising the Audio Setting related with Audio Visual
Engb
124
Chapter
14