Pioneer AVIC-HD3-II - Manual (Page 133)

% Touch [Auto ANT] in System Settings
menu.
Touching [
Auto ANT] switches between
[ Power] and [Radio].
p Regardless of whether [Power] or [Radio]
is selected, turning off the ignition switch
will cause the aerial to automatically retract
or turn off.
Setting the clock display on the
video image
You can select whether to display the clock on
the video image screen without touch panel
keys, such as DVD-Video, AV INPUT, or TV
tuner.
% Touch [Clock DISP] in System Settings
menu.
Touching [
Clock DISP] switches between
[ All SCRN] and [Audio SCRN].
! All SCRN — The clock is overlaid on the
“Video image”
! Audio SCRN — The clock is not overlaid on
the
“Video image”
Setting the CD recording mode
You can set whether to start recording tracks
automatically when you play a CD, or to manu-
ally trigger recording.
% Touch [REC Mode] in System Settings
menu.
Each touch of [
REC Mode] changes the set-
tings as follows:
! Auto — Records the tracks automatically
when a CD is played
! Manual — Lets you select the tracks you
want to record manually, and records them
! Single — Automatically records only the
first track of the CD
Setting the rear output and
subwoofer controller
The navigation system
’s rear output can be
used for full-range speaker or subwoofer con-
nection. If you switch
Rear SP setting to
Sub.W, you can connect a rear speaker lead
directly to a subwoofer without using an auxili-
ary amp.
Initially, the navigation system is set for rear
fullrange speaker connection. When rear out-
put is connected to full-range speakers (when
Rear SP setting is Full), you can connect the
RCA subwoofer output (SUBWOOFER OUT-
PUT or NON-FADING OUTPUT) to a subwoofer.
In this case, you can select whether to use the
subwoofer controller
’s (low pass filter, phase)
built-in amp of the navigation system or the
auxiliary amp or subwoofer.
p If you change the subwoofer controller
[ Rear SP] or [Preout], [Sub Woofer] or
[ Non Fading] in Audio Settings menu re-
turn to the factory settings.
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
p Rear SP can be set only when the source is
[ OFF].
1 Touch [Rear SP] in System Settings
menu.
2 Touch [Full] or [Sub.W] to switch the
rear output setting.
p When no subwoofer is connected to the
rear output, select Full. When a subwoofer
is connected to the rear speaker leads di-
rectly, select
Sub.W.
3 Touch [Preout] to switch the subwoofer
output or non fading output.
p When [Rear SP] setting is Sub.W, [Preout]
is invalid.
p Even if you change this setting, there is no
output unless you turn [ Non Fading] or
[ Sub Woofer] in Audio Settings menu
[ On].
Customising the Audio Setting related with Audio Visual
Engb
133
Chapter
14
Customising
the
Audio
Setting
related
with
Audio
Vi
sual