Pioneer AVIC-HD3-II - Manual (Page 39)

4 Touch .
Returns to the map of your surroundings.
p You can also return to the map of your sur-
roundings by pressing MAP button.
Shortcut menu
Shortcuts allow you to perform various tasks,
such as route calculation for the location indi-
cated by the scroll cursor or registering a loca-
tion in [
Address Book], faster than using the
navigation menu.
You can customise the shortcuts displayed on
screen. The shortcuts described here are pre-
pared as the default setting.
= For more details about “Changing a short-
cut
”, refer to Selecting the Shortcut on page 42
p When the Bluetooth unit (sold separately)
is connected to the navigation system, you
can use shortcuts related to phone func-
tions.
p Items marked with an asterisk (*) cannot
be removed from Shortcut menu.
% When the map is displayed, touch
.
Shortcut menu
: Route Options*
Displayed when the map is not scrolled. This
item can be selected only during route gui-
dance.
You can modify the conditions for route calcu-
lation and recalculate the current route.
= For details, refer to Modifying the Route Cal-
culation Conditions on page 28
: Destination*
Displayed when the map is scrolled. Set the
route to the place specified with the scroll cur-
sor.
: Registration
Register information on the location indicated
by the scroll cursor to the Address Book.
= For details, refer to Registering a Location
into
“Address Book” on page 54
: Vicinity Search
Find POIs (Points Of Interest) in the vicinity of
the scroll cursor.
= For details, refer to Finding a POI in the Vici-
nity on page 48
: Overlay POI
Displays icons for surrounding facilities (POI)
on the map.
= For details, refer to Displaying POI on the
Map on page 43
: Volume
Displays [ Volume].
= For more details about “Volume”, refer to
Setting the Volume for Guidance and Phone on
page 72
: Phone Book
Displays [ Phone Book].
= For details, refer to Calling a number in the
phone book on page 65
= For details, refer to Editing the entry in
“Phone Book” on page 68
: Menu Close
Hides the Shortcut menu.
Setting the Vehicle Dynamics
Display
You can change the content of the left and
right meters on the
Vehicle Dynamics Display.
Until the sensor
’s initial learning is complete,
only the voltage and clock are available.
p The speed displayed is a guideline and may
not correspond to the actual speed.
1 Switch to Vehicle Dynamics Display.
= For more details about “Changing the map
display mode
”, refer to Switching the view
mode on page 33
2 Touch the left or right meter.
Touch panel keys are displayed.
How to Read the Map Display
Engb
39
Chapter
04
How
to
Read
the
Map
Display