Pioneer AVIC-HD3-II - Manual (Page 168)

p Make sure to use the supplied stylus for ad-
justment, and gently touch the screen. If
you press the touch panel forcefully, the
touch panel may be damaged. Do not use
a sharp pointed tool such as a ballpoint
pen or a mechanical pen. Otherwise the
screen is damaged.
Stylus (supplied with navigation
system)
1 Press V button.
The Picture Adjust screen appears.
2 Press and hold V button for two sec-
onds or more.
The 4-point touch panel adjustment screen ap-
pears.
3 Touch and hold each of the arrows on
the four corners of the screen with the
touch panel adjustment pen.
Hold the pen on the arrow until each one of
the four arrows turns red.
4 Press V button.
The adjusted position data is saved.
p Do not turn off the engine while saving the
adjusted position data.
p Press MAP button to complete the 4-point
adjustment.
5 Press V button.
The 16-point touch panel adjustment screen
appears.
6 Gently touch the centre of + mark dis-
played on the screen with the touch panel
adjustment pen.
After you touch all marks, the adjusted posi-
tion data is saved.
p Do not turn off the engine while saving the
adjusted position data.
p Press V button to return to the previous ad-
justment position.
p To cancel the adjustment, press MAP but-
ton.
7 Press MAP button.
The adjustment is complete.
p If touch panel adjustment cannot be per-
formed properly, consult your local Pioneer
dealer.
Positioning Technology
The navigation system accurately measures
your current location by combining the posi-
tioning by GPS and by Dead Reckoning.
Positioning by GPS
The Global Positioning System (GPS) uses a
network of satellites orbiting the Earth. Each
of the satellites, which orbit at a height of
21 000 km, continually broadcasts radio sig-
nals giving time and position information. This
ensures that signals from at least three can be
picked up from any open area on the earth
’s
surface.
Appendix
Engb
168
Appendix