Konica Minolta bizhub C25 - Manual (Page 536)

Configuring the Printer 9-249
The [Network] - [Authentication] - [IEEE802.1x] window allows you to config-
ure the following items:
Item Description
[IEEE802.1x] Select whether to enable or disable the IEEE802.1x
function.
Choices: [Enable], [Disable]
Default: [Disable]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] -
[NETWORK SETTING] - [IEEE802.1X]
[EAP Type] Select the type of authentication used with
IEEE802.1x.
Choices: [None], [EAP-MD5], [EAP-TLS],
[EAP-TTLS], [PEAP], [LEAP], [Server
Specification]
Default: [None]
[User ID] Specifies the account name, when [EAP Type] is set
to [EAP-MD5], [EAP-TLS], [EAP-TTLS], [PEAP,
LEAP] or [Server Specification].
Range: Up to 128 bytes
Default: Blank
[Password] Specifies the password, when [EAP Type] is set to
[EAP-MD5], [EAP-TLS], [EAP-TTLS], [PEAP], [LEAP]
or [Server Specification].
Range: Up to 128 bytes
Default: Blank
[TTLS Anonymous
Name] Specify the logon name used with EAP-TTLS pri-
mary authentication. Specifies the TTLS anony-
mous name, when [EAP Type] is set to [EAP-TTLS]
or [Server Specification].
Range: 1 to 128 bytes
Default: [anonymous]
d
If [EAP Type] is set to [Server Specification]
while the actual authentication method is
EAP-MD5, type in the same name as the
User ID.