Konica Minolta bizhub C25 - Manual (Page 164)

Printing With NetWare 3-5
– NetWare Print: Select [Enable].
– Frame Type:
Select [Auto]. (Select the frame type according to the network
environment.)
– Mode: Select [PServer].
– Print Server Name:
Specify the print server name created in step 4.
– Print Server Password:
Specify only when setting from the NetWare server.
– Print Queue Scan Rate: Specify 1. (Change as necessary.)
– Bindery/NDS: Select [Bindery/NDS].
– Preferred File Server:
Specify the name of the file server that connects to the Pserver.
7
Restart the printer (turn the printer off, then on again).
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection column,
check that the created Pserver is connected.
For NetWare 4.x Remote Printer Mode (NDS)
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Select either the organization or organizational unit container that offers
the print service, and then click [Print Services Quick Setup] on the
[Tools] menu.
4
Enter the appropriate names in the [Printer Server Name], [Printer Name],
[Print Queue Name], and [Print Queue Volume] fields, select [Other/
Unknown] from the [Printer type] field, and then save the specified set-
tings.
d
For queue user privileges, printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documenta-
tion, and specify settings as necessary.