Konica Minolta bizhub C25 - Manual (Page 179)

Using LinkMagic 4-10
Name Description
[Scanner Settings]
group box Select the settings for scanning the image.
[Basic/Advanced]
list Select the general scan setting.
If [Basic] is selected, specify basic settings from
the [Original Size], [Scan Type], and [Paper
source] lists.
If [Advanced] is selected, detailed settings can
be specified from the TWAIN driver dialog box
that appears.
d
The resolution is 300 dpi when [Basic] is
selected.
Choices: [Basic], [Advanced]
Default: [Basic]
[Original Size] list Select the size of the document. These settings
are available when [Basic] is selected in the
[Basic/Advanced] list.
If [Custom Size] is selected, a new paper size
setting can be added from the Custom Size Set-
ting dialog box that appears.
- Choices
Flatbed: [A4], [B5], [A5], [Letter], [Custom
Size]
ADF: [A4], [B5], [A5], [Legal], [Letter], [Custom
Size]
Default: [Letter (English)], [A4 (except
English)]
- Custom Size Settings (for Flatbed)
Width: 13 - 215 mm (0.5 - 8.50 in)
Height: 13 - 297 mm (0.5 - 11.60 in)
Unit: mm, in
- Custom Size Settings (for ADF)
Width: 13 - 215 mm (0.5 - 8.50 in)
Height: 13 - 355 mm (0.5 - 14.00 in)
Unit: mm, in