Tcp/ip, Ip addr. setting, Tcp/ip -9 ip addr. setting -9 – Konica Minolta bizhub C25 User Manual
Page 240: Network setting menu 7-9
NETWORK SETTING Menu
7-9
TCP/IP
IP ADDR. SETTING
IP ADDRESS
SUBNET MASK
Purpose
Enables or disables TCP/IP.
If ENABLE is selected, TCP/IP is enabled.
If DISABLE is selected, TCP/IP is disabled.
Options
DISABLE/ENABLE
Default
ENABLE
Purpose
Sets the IP address of this machine on the network.
Default
0.0.0.0
Range
0-255 for each xxx triplet
Use the keypad to input each number; use the * and )
keys to move between triplets.
Notes
A single digit number, such as "1", cannot be input as
"001".
Align the number on the left and input "1" as "1 _ _". Use
the * and ) keys to move between triplets.
The Back key can also be used for deleting. To cancel IP
Address menu, hold down the Back key for more than one
second, and then press the Back key again after all set-
tings have been cleared.
Purpose
Sets the subnet mask of the network.
The subnet mask allows you to limit access to your
machine (for example, according to departmental divi-
sions).
Default
0.0.0.0
Range
0-255 for each xxx triplet
Use the keypad to input each number; use the * and )
keys to move between triplets.