Konica Minolta bizhub C25 - Manual (Page 322)

Viewing Printer Status 9-35
[Tray2] [Paper Size] Indicates the setting for the size of paper
loaded into [Tray2].
[Width] Indicates the paper width when [Paper
Size] is set to [Custom Size].
[Length] Indicates the paper width when [Paper
Size] is set to [Custom Size].
[Paper Type] Indicates the setting for the type of paper
loaded into [Tray2].
[Tray3]
This item appears
only if an optional
lower feeder unit is
installed.
[Paper Size] Indicates the setting for the size of paper
loaded into [Tray3].
[Paper Type] Indicates the setting for the type of paper
loaded into [Tray3].
[Any Tray
Setting] [Tray1] [Paper Size] Indicates whether Any Paper Size setting
for [Tray1] is enabled or disabled.
[Paper Type] Indicates whether Any Media Type set-
ting for [Tray1] is enabled or disabled.
[Tray2] [Paper Size] Indicates whether Any Paper Size setting
for [Tray2] is enabled or disabled.
[Paper Type] Indicates whether Any Media Type set-
ting for [Tray2] is enabled or disabled.
[Tray3]
This item
appears
only if an
optional
lower
feeder
unit is
installed. [Paper Type] Indicates whether Any Media Type set-
ting for [Tray3] is enabled or disabled.
[Tray Chaining] If [Enable] is indicated and the specified
paper tray runs out of paper during print-
ing, a paper tray loaded with paper of the
same size is automatically selected so
printing can continue.
If [Disable] is indicated and the specified
paper tray runs out of paper, printing
stops.
Item Description