Konica Minolta bizhub C25 - Manual (Page 168)

Printing With NetWare 3-9
For NetWare 5.x/6 Novell Distributed Print Service
(NDPS)
d
Before specifying settings for NDPS, check that the NDPS broker and
NDPS manager have been created and loaded.
d
Also, before performing the following procedure, check that the TCP/
IP protocol has been set in the NetWare server, and check that the IP
address has been set for this machine and that this machine is on.
1
Log on to NetWare as an administrator from a client computer.
2
Start up NWadmin.
3
Right-click the organization or organizational unit container where you
will create the printer agent, and then click [NDPS Printer] on the [Create]
submenu.
4
In the [NDPS Printer Name] box, enter the printer name.
5
In the [Printer Agent Source] column, select [Create a New Printer Agent],
and then click the [Create] button.
6
Check the printer agent name, and then in the [NDPS Manager Name]
box, browse through the NDPS manager names, and register one.
7
In the [Gateway Types], select [Novell Printer Gateway], and then register
it.
8
In the Configure Novell PDS for Printer Agent window, select [(None)] for
the printer type and [Novell Port Handler] for the port handler type, and
then register the settings.
9
In [Connection type], select [Remote (LPR on IP)], and then register it.
10
Enter the IP address set for this machine as the host address, enter
[Print] as the printer name, and then click the [Finish] button to register
the settings.
11
The printer driver registration screen appears. Select [None] for each
operating system to complete the registration.
d
For settings for the queue user rights, printer notification option,
assignment of multiple queues, and passwords, refer to the NetWare
documentation, and set them as necessary.