Konica Minolta bizhub C25 - Manual (Page 459)

Configuring the Printer 9-172
TCP/IP
TCP/IP (shown previous)
The [Network] - [TCP/IP] - [TCP/IP] window allows you to configure the fol-
lowing items. For more information on these TCP/IP, see chapter 8, “Net-
work Printing”.
Item Description
[TCP/IP] Select whether or not to make a connection via TCP/IP.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration Menu Equivalent:
[UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [TCP/IP]
[Speed] Specifies the operating mode and speed for Ethernet.
Choices: [Auto], [10Base-T(Half)], [10Base-T(Full)],
[100Base-TX(Half)], [100Base-TX(Full)],
[1000Base-T(Full)]
Default: [Auto]
Configuration Menu Equivalent:
[UTILITY]- [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [SPEED/DUPLEX]
[LPD] Select whether or not LPD is used.
Choices: [Enable], [Disable]
Default: [Enable]
[SLP] Select whether or not SLP is used.
Choices: [Enable], [Disable]
Default: [Enable]
Configuration Menu Equivalent:
[UTILITY]- [ADMIN. MANAGEMENT] - [NETWORK
SETTING] - [SLP]
[LLMNR] Select whether or not LLMNR is used.
Choices: [Enable], [Disable]
Default: [Enable]
[Apply] button Applies the configuration settings for this window.
[Clear] button Resets all configuration settings to previous values.