Konica Minolta BIZHUB C351 - Manual (Page 59)

Setting Up Network Printing 3
C351 3-4
*1 If the printer driver is installed using the installer while this machine is con-
nected to the network, the required Peer to Peer Printing Tool is also installed
automatically, and Port 9100 is created.
*2 The printer driver is not compatible with the operating system.
*3
Installing the printer driver using the installer is not applicable.
*4 Not required since standard operating system functions are used.
To obtain the Peer to Peer Printing Tool, consult the dealer where you pur-
chased this machine.
To specify the driver settings when installing the Peer to Peer Printing Tool,
refer to “Port 9100 Printing (Windows 98SE/Me/2000/XP/Server 2003)” on
page 3-13.
When using SMB printing, you can perform network printing without install-
ing the Peer to Peer Printing Tool software. For details, refer to “SMB Print-
ing” on page 3-8.
2
Reminder
Before setting up network printing, install the printer driver. For details on
installing the printer driver, refer to “Installing the Printer Driver” on
page 2-1.
To perform network printing, change the printer port for the installed
printer driver to one for a network connection, and then change the set-
tings on this machine as necessary. For an IPP connection, it is neces-
sary to install the printer driver first.
Network Printing in a NetWare Environment
NetWare Version Protocol Used Emulation Service Mode
NetWare 4.x IPX NDS/Bindery Pserver/Nprinter
NetWare 5.x/6 IPX NDS Pserver
TCP/IP NDPS(lpr)