Konica Minolta BIZHUB C351 - Manual (Page 118)

Setting Up the PCL Driver 5
C351 5-5
5.2 Specifying the Setup Tab Settings
Printing to Suit the Paper Size
You can enlarge or reduce documents created when printing to match the
output paper size.
1
Click the Setup tab.
2
From the “Original Size” and “Output Size” drop-down lists, select the
desired settings.
– You can also specify any enlargement or reduction ration in the
“Zoom” box.
2
Note
If the paper size is other than the custom size, select the desired settings
after specifying the settings in Custom Size.
When “W” is selected for each standard paper size in the printer driver,
the data can be centered and printed.
For example, if A4 size data is created and you want to center and print
on A3 size paper, specify “A4 W” as the paper size in the printer driver
and specify “Tray 1” or “Bypass Tray” as the paper source.
To print, load A3 size paper in the tray (“Tray 1” or “Bypass Tray”) of this
machine that is specified in the printer driver, and then specify the set-
tings described below from [Basic Screen (Paper)] — [Change Tray Set-
tings] — [Oversized Paper] on the control panel.
Select [A4W] .
Enter the A3 paper size (420.0 × 297.0) in [Change Size] .