beautypg.com

Stapling, Hole punching, Stapling -11 hole punching -11 – Konica Minolta BIZHUB C351 User Manual

Page 124

background image

Setting Up the PCL Driver

5

C351

5-11

Stapling

Multiple-page documents can be stapled.

The staple function is available only when the optional finisher is installed.

1

Click the Setup tab.

2

Select the “Staple” check box.

3

From the drop-down list, specify the number of staples and the sta-
pling position.

2

Note

Depending on the selected Binding Position setting, different stapling po-
sitions are available.

Hole Punching

Holes can be punched into the printed document.

The hole punch function is available only when optional finisher FS-507 or
FS-603 is installed. When using optional finisher FS-603, the punch kit must
be installed.

1

Click the Setup tab.

2

Select the “Hole-Punch” check box.

3

From the drop-down list, specify the number of punched holes.