4 print job management, Specifying job operations, Specifying settings (for windows) – Konica Minolta BIZHUB C351 User Manual
Page 338: Print job management -105
Various Settings
10
C351
10-105
10.4
Print Job Management
Specifying Job Operations
%
You can specify job operations on this machine by setting a printer
driver.
2
Note
The three printer drivers that can be set on this machine are as follows:
Konica Minolta PCL Printer Driver for Windows
Konica Minolta PostScript Printer Driver for Windows 2000/XP/Server
2003
Konica Minolta PostScript PPD Printer Driver for Mac OS X
Specifying Settings (for Windows)
1
Click the [Properties] button on the Print dialog box to open the printer
driver setup dialog box.
2
Click the Setup tab (PCL or PostScript driver).
3
From the “Output Method” drop-down list, select the output method.
Print: Prints immediately.
Secure Print: Enters the ID and password on this machine’s control
panel, then prints. (Up to 100 documents)
When the password rules are enabled on this machine, specify the
password with 8 digits.
Save in User Box: Saves the document to be printed in a box on.
When the power rules are enabled on this machine, specify the box that
is created on this machine.
Save in User Box and Print: Saves the document in a box and prints at
the same time.
Proof and Print: After part of the document has been printed, this ma-
chine stops printing temporarily. Select to avoid misprinting a large vol-
ume of print jobs.