Konica Minolta BIZHUB C351 - Manual (Page 324)

Various Settings 10
C351 10-91
2
Note
To apply any changes to settings for the Network tab, restart this ma-
chine (turn the main power off, then on again).
When turning the power off, then on again, be sure to turn the sub-power
switch off first, then the main power switch. In addition, wait at least 10
seconds before turning the power on again; otherwise, this machine may
not function properly.
Item Description
TCP/IP Specify whether to enable TCP/IP.
Network Speed Select the operation speed.
IP Address Setting Method Select when using a DHCP server.
IP Address Specify the IP address of this machine (format: “***.***.***.***”,
input range for ***: 0—255).
Subnet Mask Specify the subnet mask connecting to a network (format:
“***.***.***.***”, input range for ***: 0—255).
Default Gateway Specify the default gateway address connecting to a network
(format: “***.***.***.***”, input range for ***: 0—255).
Port 1 Specify the RAW port number (input range: 1—65535).
Port 2
Port 3
Port 4
Port 5
Port 6
Dynamic DNS Setting Specify whether to enable DNS.
Host Name Specify the host name (up to 63 characters).
DNS Domain Name Setting Specify the domain name (up to 254 characters including the
characters for the host name).
DNS Server Setting Register a maximum of three DNS servers (format: “***.***.***.***”,
input range for ***: 0—255).
SLP Setting Specify whether to enable SLP.
LPD Setting Specify whether to enable LPD.