Konica Minolta Printgroove - Manual (Page 43)

6 Sending a Print Job to Printgroove POD Queue
6-2 Printgroove POD Queue Quick Install
3
Click the [Setup] button. The Print Setup screen opens:
4
Select Printgroove POD Driver from the Name drop-down menu.
5
Click the [OK] button. The Print Setup screen closes.
6
The Print Document screen remains opened. Initiate printing from this
screen (the process will vary). The screen closes and the document is
printed on the virtual port. A print progress screen may open and track
the print operation.
– When the document completes printing to the virtual port, Print-
groove POD Driver converts the file to PRN format.
7
When the PRN conversion is complete, the pop-up screen closes and
the File Selection screen opens:
– The Available File List contains the newly created PRN file. The file
has the same name it did in the native application but the extension
now includes .prn.
– If you have multiple native files you would like combined into a sin-
gle PDF document, you may add those files now.
– To add another file, click the [Add New] button. On the screen that
opens, navigate to the file you wish to add. Select the file then click
the [Open] button. The file opens in its native application. Repeat