Konica Minolta BIZHUB 223 - Manual (Page 22)

bizhub 423/363/283/223 2-11
2.2 Main Body 2
Adjusting the angle of the Control Panel
You can adjust the angle of the Control Panel to any of four different levels. You can also tilt the control pane
to the left. Set it to your desired position.
NOTICE
When tilting the Control Panel, do not grab the Touch Panel.
1
Pull the Control Panel Release Lever toward you, and then pull
the Control Panel up or down.
You can adjust the angle of the Control Panel to any of four dif-
ferent levels.
2
To tilt the Control Panel to the left or right, hold the bottom of the
Control Panel, and then tilt the panel to the left or right.