Konica Minolta BIZHUB 223 - Manual (Page 14)

bizhub 423/363/283/223 2-3
2.1 Option configuration 2
2 Reverse Automatic Document Feed-
er DF-621 bizhub 283/223 is an option.
Automatically feeds and scans originals by page. This
unit automatically reverses and scans 2-sided origi-
nals.
This unit is hereinafter referred to as the ADF through
the manual.
3 Original Cover OC-509 Fixes the loaded originals.
This unit is hereinafter referred to as the Original Cov-
er through the manual.
4 Authentication Unit (biometric type)
AU-102 Performs user authentication by scanning vein pat-
terns in the finger.
The Working Table WT-506 is required to install the
authentication unit (biometric type) AU-102.
This unit is hereinafter referred to as the Authentica-
tion Unit through the manual.
5 Authentication Unit (IC card type)
AU-201 Performs user authentication by scanning information
recorded on the IC card.
The Working Table WT-506 is required to install the
authentication unit (IC card type) AU-201.
This unit is hereinafter referred to as the Authentica-
tion Unit through the manual.
6 Working Table WT-506 Provides an area to temporarily place an original or
other materials. This is also used when the authentica-
tion unit is installed.
7 Keyboard Holder KH-101 Install this holder to use a compact keyboard.
For details on compact keyboards, contact your serv-
ice representative.
8 Desk DK-508 By using the Desk, you can install this machine on the
floor.
This unit is hereinafter referred to as the Desk through
the manual.
•
This option may not be available depending on the
sales area.
9 Paper Feed Cabinet PC-109 Allows you to load up to 500 sheets in the top tray and
use the bottom tray as a storage box.
This unit is hereinafter referred to as the Single Paper
Feed Cabinet through the manual.
10 Paper Feed Cabinet PC-208 Allows you to load up to 500 sheets respectively in the
top and bottom trays.
This unit is hereinafter referred to as the Double Paper
Feed Cabinet through the manual.
11 Paper Feed Cabinet PC-409 Allows you to load up to 2500 sheets.
This unit is hereinafter referred to as the LCT through
the manual.
12 Saddle Stitcher SD-509 Install this unit onto the Finisher FS-527 to allow
Fold/Bind.
Referred to as the Saddle Stitcher throughout the
manual.
13 Finisher FS-527 Sorts, groups and staples printed paper before feeding
out.
To install the Finisher FS-527, the Desk DK-508, Pa-
per Feed Cabinet PC-409, Paper Feed Cabinet PC-
109, or Paper Feed Cabinet PC-208 must be installed
onto this machine.
14 Punch Kit PK-517 Install this unit onto the Finisher FS-527 to enable
punching holes.
15 Job Separator JS-603 Install this unit onto the Finisher FS-527.
Collects printed pages.
16 Finisher FS-529 Install this unit onto the output tray of the main unit to
sort, group or staple printed paper before feeding out.
No. Name Description