Konica Minolta Konica Minolta 240f - Manual (Page 99)

Konica Minolta 240f 4-13
4.3 List of settings 4
User Install
You can specify the settings required for using the machine.
d
Refer to Chapter 4, "Initial Setup (User Install)" in the User’s Guide Scan and Fax Operations.
Mirroring
You can copy the setting information to another machine of the same model.
d
Refer to Chapter 3, "Mirroring the Machine Settings" in the User's Guide Administrator Operations.
Initialize all data
You can erase the data set in , such as the address book and copy/fax function settings, and the
data saved in the machine, such as the stored documents. Data that has been cleared cannot be restored.
d
Refer to Chapter 3, "List of Machine Management Settings" in the User's Guide Administrator Operations.
PIN Mode
The entered PIN (personal identification number) will not appear in the journal, error message printout,
delayed command list or TCR (transmit confirmation report).
d
Refer to Chapter 3, "Activating the PIN Mask" in the User's Guide Administrator Operations.
Admin Password
You can set the administrator password. You can set an administrator password to prevent users other than
the administrator from editing the settings in the [Management] screen.
d
Refer to Chapter 3, "Setting Security Codes" in the User's Guide Administrator Operations.
Protect Passcode
You can set the protect passcode. A protect passcode is required when using function protect settings.
d
Refer to Chapter 3, "Setting Security Codes" in the User's Guide Administrator Operations.