Konica Minolta Konica Minolta 240f - Manual (Page 12)

Safety information 1
1-6 Konica Minolta 240f
1.2
WARNING
Symbol Meaning
• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the
product employs a laser, the laser beam source could cause blindness.
• Do not attempt to remove the covers and panels which have been fixed to the product.
Some products have a high-voltage part or a laser beam source inside that could cause
an electrical shock or blindness.
• Use only the power cord supplied in the package. Failure to use this cord could result in
a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and NEVER use it for
any other product. Failure to observe this precaution could result in a fire or electrical
shock.
• Use only the specified power source voltage. Failure to do that could result in a fire or
electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or machines. Use of
a power outlet for more than the marked current value could result in a fire or electrical
shock.
Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a fire
or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the
power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could
result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, unplug
the power cord from the power outlet, and then call your authorized service representa-
tive.
• Do not use an extension cord, in principle. Use of an extension cord could cause a fire or
electrical shock. Contact your authorized service representative if an extension cord is re-
quired.
• Do not place a flower vase or other container that contains water, or metal clips or other
small metallic objects on this product. Spilled water or metallic objects dropped inside the
product could result in a fire, electrical shock, or breakdown.
• Should a piece of metal, water, or any other similar foreign matter get inside the product,
immediately turn OFF the power switch, unplug the power cord from the power outlet, and
then call your authorized service representative.
• Do not keep using this product, if this product becomes inordinately hot or emits smoke,
or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your authorized service representative. If you keep on
using it as is, a fire or electrical shock could result.
• Do not keep using this product, if this product has been dropped or its cover damaged.
Immediately turn OFF the power switch, unplug the power cord from the power outlet, and
then call your authorized service representative. If you keep on using it as is, a fire or elec-
trical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and
cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding terminal.