Konica Minolta Konica Minolta 240f - Manual (Page 130)

Specifications 7
7-10 Konica Minolta 240f
7.1
7.1.4 Energy and noise data according to RAL-UZ 122
Power consumption and switch time
*1 Averaged values, measured without accessory.
*2 Time elapsed after the last copy until the device enters the mode. Entered is the set value from
manufacturer. If changes are possible, the value will be set in ( ).
*3 Recovery time is the amount of time it takes to return to ready mode.
*4 Maximum power consumption, short peak after switch on.
*5 Low-Power Mode. This mode will be entered by pressing the , or automatically after the
preset time. Refer to page 2-24.
*6 Sleep Mode. This mode will be entered by pressing and hold the for approximately three
seconds, or automatically after the preset time. Refer to page 2-24.
*7 Power consumption of 0 Watt is only achieved by disconnecting the machine from the power line.
Noise emissions
*1 Declared sound-power level according to RAL-UZ 122.
Operating Mode Power consumption
*1
(Watt)
Switch on 1440
*4
Copying
(24 pages/minute) 550 Activation Time
*2
(minute)
Ready 47 0 Recovery time
*3
(sec.)
Energy save mode *5 16.5 1 (1-60) 12.8
Energy save mode
*6
9 2 (2-180) 16
Switch off
*7 0.1 Switch activated 43.2
Mode Noise
L WA L WA d- according BAM
*1
Ready 34.5 dB(A) —
Working — 62.1 dB(A)