Konica Minolta Konica Minolta 240f - Manual (Page 74)

Performing scanning 3
3-16 Konica Minolta 240f
3.2
3.2.4 Saving a scanned document to USB memory
You can save a scanned document to USB memory connected to the machine.
d
Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.
USB memory with a security function, memory card readers connected via USB, USB memory via an
extension cable and USB hub, and USB memory that does not meet the USB standards, are all unsupported.
If the USB memory becomes full while the data is being saved, the data that is being written is all deleted.
Therefore, make sure that the USB memory has enough free space in advance.
If you want to connect the USB memory via an extension cable, use a cable that is shorter than 3 meters.
1
Load the document, and press .
% For details on loading documents, refer to page 2-31.
2
Press the [PC/USB] tab, and then [USB].
USB memory