Konica Minolta Konica Minolta 240f - Manual (Page 53)

Konica Minolta 240f 2-29
2.7 Loading paper 2
6
Close the paper cassette.
7
Set the paper size.
% See page 2-30 how to set it.
8
Attach the paper size sticker supplied with your machine to the front of the cassette.
d
When setting paper longer than A4 paper size, remove the guide stopper from the back of the end guide, and
then replace and secure it on the groove in front of the end guide (the guide stopper will be under the paper).
2.7.6 Loading paper into the bypass tray
When you need to use a paper size that is not currently loaded in the paper cassette, or when you want to
print on an envelope, transparency film or custom sized paper, use the bypass tray.
d
Only use print media specified on page 2-25 to avoid paper jams and print quality problems.
1
Open the bypass tray on the right side of your machine. Unfold the paper support extension.
2
To set the paper, 1) raise the flapper release lever 2) load paper until it comes to a stop. Be sure to place
the printing surface down.
guide stopper