Konica Minolta Konica Minolta 240f - Manual (Page 125)

Konica Minolta 240f 7-5
7.1 Specifications 7
Scanner specifications
Fax specifications
*1 Communication is not possible with machines not equipped with this mode.
*2 This is the time when you transmit A4 documents with approx. 700 characters in normal mode
(8 dots/mm e 3.85 lines/mm) via Super G3 (based on ITU-TV.34, 33,600 bps). This is the electronic
transmission speed only for image information, excluding the transmission control time. Note that the actual
transmission speed depends on document contents, the other party's machine model, and line status. It will
be between 6 and 7 seconds for the communication with G3 machines (when you transmit the same
document in 14400bps).
Item Specifications
Resolution 600 e 600 (dots/inch)
Scanning method Solid state electronic flatbed scanning using color CCD image sensor
Document size ADF (Auto Document Feeder)
Length: 100 to 900 mm (at resolutions other than 600 dots/inch)
100 to 500 mm (at 600 dots/inch resolution)
Width : 120 to 216 mm
Document glass
Maximum: 216 mm e 356 mm (no minimum restrictions)
Document loading method Face up
Document pages automati-
cally separated 80 pages
Document storage capacity 80 pages
Document scanning speed Approx. 2.2 seconds/page (A4)
Item Specifications
Scanline density Scanner
Ultra-high resolution
mode: Main scanner 600 dots/inch e sub scanner
600 dots/inch, or main scanner 16 dots/mm
e sub scanner 15.4 lines/mm
*1
High resolution mode: Main scanner 8 dots/mm e sub scanner
7.7 lines/mm
*1
Standard mode: Main scanner 8 dots/mm e sub scanner
3.85 lines/mm
*1
Printer: Main scanner 16 dots/mm e sub scanner
15.4 lines/mm
Data transmission speed 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400,
12000, 9600, 7200, 4800, 2400 bps (Automatic selection)
Supported line type Input phone line
Electronic transmission
speed Between 2 and 3 seconds (33600 bps)
*2
Image encoding method MH/MR/MMR/JBIG