Konica Minolta Konica Minolta 240f - Manual (Page 78)

Transmitting faxes 3
3-20 Konica Minolta 240f
3.3
Using the address book for transmission
1
Load the document, and press .
% For details on loading documents, refer to page 2-31.
2
Set the resolution and contrast as necessary.
3
Specify the destination.
% If you loaded the document in the ADF, this concludes the
procedure.
% If you loaded the document on the document glass, load
the next document, and press [Next Doc]. Press [Tx Start]
to start transmission.
d
For details on canceling transmission, refer to page 3-20.
For details on registering destinations, refer to page 4-3.
3.3.2 Canceling faxes
This section describes the procedure for canceling faxes that are being transmitted. For details on canceling
faxes reserved with delayed transmission, etc., refer to Chapter 4, "Canceling / Checking Faxes" in the User’s
Guide Scan and Fax Operations.
1
Press .
% The information for the current document is displayed.
2
If you want to cancel the current trasmission, press [Delete],
and proceed to step 5.
% When performing broadcast transmission, "Broadcast" is
displayed on the screen. To individually check or delete
destinations for the broadcast, proceed to step 3.
% Transmission will not be canceled if you press [Close]. The
display switches to the Fax Ready screen.
3
Press [Detail].
4
Select the destination you want to cancel, and press [Delete].
% If you do not want to cancel a destination, press [Close].
This ends the procedure.
% You can select multiple destinations.
5
Press [Close].