Konica Minolta Konica Minolta 240f - Manual (Page 38)

Connection and main settings 2
2-14 Konica Minolta 240f
2.5
2.5 Connection and main settings
2.5.1 Connecting the power cord
6 WARNING
- Connect the power cord to the power jack, and confirm that it is firmly inserted. Loose connections may
cause fires.
- Make sure to connect the ground wire to prevent electrocution in case of electrical leakage.
- Confirm that there is no dust attached to the power plug before inserting it into the outlet. Also remove
the power plug from the outlet to inspect and clean it once every six months to a year. Dust attached
to the power plug may cause fires or electrocutions.
1
Connect the power cord to the power jack on the left side of
the machine.
% Secure the power cord using the included clamp.
2
Insert the power plug into the power outlet.
2.5.2 Connecting the LAN cable
1
Attach a ferrite core to the LAN cable.
% Make a loop near the connector of the cable.
2
Connect the LAN cable to the network connector, as indicated
in the diagram.