2 name of each component, 1 external components, Name of each component -4 – Konica Minolta bizhub PRESS C1085 User Manual
Page 98: External components -4
Name of each Component
8
8-4
bizhub PRESS C1100/C1085
8.2
8.2
Name of each Component
8.2.1
External components
No.
Name
Description
1
Toner access door
When adding toner, press the left-hand lever to open this
door.
2
Touch panel
Displays a screen such as the [MACHINE] screen to enable
you to carry out machine operations and settings. Also,
operation or troubleshooting procedures can be provided.
3
Control panel
Performs operations or configures settings.
4
Port (type A) (USB 2.0/1.1 com-
patible)
Used to connect devices such as backup HDD, keyboard,
and mouse.
This port is available for low-power devices only. Provide
an external supply of power for devices that require a large
amount of power.
5
Sub power switch
Turns the sub power of the machine on or off.
6
Right side door
Open when handling a paper jam.
7
Waste toner box door
Open when replacing a waste toner box.
8
Left side door
Open when handling a paper jam.
9
ADF (Option)
Scans data while automatically feeding an original page by
page. This device automatically inverts a double-sided
original to scan data.
10
Tray 1/2/3 (Option)
Up to 1390 sheets (80 g/m
2
/ 21 lb Bond) can be loaded
into Tray 1/2 (upper tray / middle tray), and up to 1850
sheets (80 g/m
2
/ 21 lb Bond) into Tray 3 (lower tray).