Konica Minolta bizhub PRESS C1085 - Manual (Page 108)

Major Specifications 8
8-14 bizhub PRESS C1100/C1085
8.4
8.4.2 Feeding-related optional devices
d
Reference
The paper size and weight vary depending on conditions such as setting or finishing. For details about the
detailed conditions or specifications, refer to the [HTML User's Guide].
Paper Feeder Unit PF-707
The Paper Feeder Unit PF-707 can be used as the first paper feeder unit or when the Feed Adjuster FA-502
is connected, it can be used as the second or successive paper feeder units. When combined with other
units, the Paper Feeder Unit PF-707 can be connected as the first, second, or third unit.
Paper tray
1: Tray 1, 4, 7 (upper tray)
2: Tray 2, 5, 8 (middle tray)
3: Tray 3, 6, 9 (lower tray)
* Tray numbers 1 to 3 refer to the tray numbers when the Paper Feeder Unit PF-707 is mounted as the
first paper feeder unit. Tray numbers 4 to 6 refer to the tray numbers when the Paper Feeder Unit PF-707
is mounted as the second paper feeder unit, and tray numbers 7 to 9 refer to the tray numbers when it is
mounted as the third paper feeder unit.
Specifications
Paper weight 55 g/m 2 to 350 g/m 2 / 13 lb Bond to 93 lb Bond
• Coated paper: 81 g/m
2
to 350 g/m
2
/ 22 lb Bond to 93 lb Bond
Paper size When installed as the first paper feeder unit:
•
SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, B6 w,
A6 w, 13 e 19 w, 12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w,
8.5 e 11 w/v, 5.5 e 8.5 w/v, 8K w, 16K w/v, Foolscap*
• Tab Paper: A4T v, 8.5 e 11T v
• Custom: Width 100 mm to 330.2 mm, Length 139.7 mm to 487.7 mm /
Width 3.94" to 13", Length 5.5" to 19.2"
When installed as the second or successive paper feeder unit:
•
SRA3 w, A3 w, B4 w, SRA4 w/v, A4 w/v, B5 w/v, A5 w/v, 13 e 19 w,
12 e 18 w, 11 e 17 w, 9 e 11 v, 8.5 e 14 w, 8.5 e 11 w/v, 5.5 e 8.5 w/v,
8K w, 16K w/v, Foolscap*
• Tab Paper: A4T v, 8.5 e 11T v
• Custom: Width 139.7 mm to 330.2 mm, Length 139.7 mm to 487.7 mm
/ Width 5.5" to 13", Length 5.5" to 19.2"
JIS standard sizes are used for B series in the factory setting. For JIS/ISO
switching, contact your service representative.
You can change the detectable standard size. Also, you can select [ON]
from [K Size] on the Utility/Counter screen to detect the K size. For details,
refer to the [HTML User's Guide].
If the paper width is less than 139.7 mm / 5.5", use the small size guides.
For details, refer to the [HTML User's Guide].
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w.
Storage capacity Tray 1, 4, 7 (upper tray): 1390 sheets (80 g/m
2
/ 21 lb Bond)
Tray 2, 5, 8 (middle tray): 1390 sheets (80 g/m
2
/ 21 lb Bond)
Tray 3, 6, 9 (lower tray): 1850 sheets (80 g/m
2
/ 21 lb Bond)