Konica Minolta bizhub PRESS C1085 - Manual (Page 111)

bizhub PRESS C1100/C1085 8-17
8.4 Major Specifications 8
Post Inserter PI-502
To use Post Inserter PI-502, mount it in Finisher FS-532. You can load paper into the upper and lower trays
of Post Inserter PI-502 and feed paper to an output-related optional device. On the control panel of Post
Inserter PI-502, you can configure the punch, staple, or fold function for paper to be fed from the lower tray.
For details, refer to the [HTML User's Guide].
Paper tray
1: Upper tray
2: Lower tray
Specifications
Paper weight 50 g/m 2 to 300 g/m 2 / 13 lb Bond to 81lb Bond
Paper size Upper tray
•
A4 w/v, B5 w/v, A5 v,
8.5 e 11 w/v, 7.25 e 10.5 w, 5.5 e 8.5 v, 16K w/v
• Custom: Width 182 mm to 330 mm, Length 139 mm to 297 mm / Width
7.17" to 12.99", Length 5.47" to 11.69"
Lower tray
•
A3 w, B4 w, SRA4 w, A4 w/v, B5 w/v, A5 v,
12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w/v, 7.25 e 10.5 w/v, 5.5 e
8.5 v, 8K w, 16K w/v, Foolscap*
• Custom: Width 182 mm to 330 mm, Length 139 mm to 482 mm / Width
7.17" to 12.99", Length 5.47" to 18.98"
*Foolscap refers to 8.5 e 13 w, 8.25 e 13 w, 8.12 e 13.25 w, or 8 e 13 w.
Storage capacity 200 sheets (80 g/m
2
/ 21 lb Bond) or within 30 mm / 1.18" thick for the upper
tray and lower tray each