Konica Minolta bizhub PRESS C1085 - Manual (Page 56)

Both Sides Adjustment 6
6-6 bizhub PRESS C1100/C1085
6.1
7
Press [Exit Print Mode].
8
Measure the line length at each of points [1] to
[8] on the printed-out chart using a scale.
% The figure on the right illustrates an example
to measure points [1] and [5]. As illustrated in
this example, measure the line length at
each printed point.
% The measurement value can be entered in
units of up to 0.1 mm.
% Write down the measured lengths so that
you do not forget them.
[ 1 ]
[ 5 ] [ 7 ]
[ 6 ] [ 8 ]
[ 2 ]
[ 3 ] [ 4 ]
[ 1 ]
[ 5 ]