Konica Minolta bizhub PRESS C1085 - Manual (Page 19)

bizhub PRESS C1100/C1085 2-7
2.1 Turning the Power ON/OFF 2
Tips
- Utility/Counter - [Administrator Setting] - [System Setting] - [Power Save Setting] - [Power Save Func-
tion Setting] is the same as Utility/Counter - [User Setting] - [System Setting] - [Power Save Setting] -
[Power Save Function Setting]: use either of the methods to configure a setting.
- If Power Save on the control panel is pressed for one second or more, either of Auto Low Power and
Auto Shut OFF is enabled. To enable either function, select [Administrator Setting] - [System Setting] -
[Power Save Setting] - [Power Save Function Setting].
d
Reference
For details, refer to the [HTML User's Guide].
NOTICE
In the Auto Shut OFF mode, only jobs from [PageScope Direct Print (PSDP)] can be printed out. To use other
jobs, check that this machine can be used normally.
If this machine is turned off because the Weekly Timer has started, job data is not received even if it is sent.
While this machine can be used normally, send job data again.