Konica Minolta bizhub PRESS C1085 - Manual (Page 15)

bizhub PRESS C1100/C1085 2-3
2.1 Turning the Power ON/OFF 2
2 Before Getting Started
2.1 Turning the Power ON/OFF
Power supply
This machine has two power switches: main power switch and sub power switch.
NOTICE
The main power switch is normally kept turned on.
The main power switch must be turned on or off only when you start this machine for the first time or when
you restart this machine.
Turning the power on
1
Open the right side door and left side door of the main body, then turn the main power switch on.
When the main power switch is turned on, the Power LED on the control panel lights up in red.
2
Turn on the sub power switch on the right-hand side of the main body.
When the sub power switch is turned on, the Power LED on the control panel lights up in green.
After the start screen has been displayed, the
default screen is displayed.
The default screen can be selected from Utili-
ty/Counter. For details, refer to the [HTML Us-
er's Guide].
When [Ready to print] is displayed on the [MA-
CHINE] screen, you can use this machine.
OFF ON
OFF ON